RESOURCES
New Quick-Connect Metal Grille Flush Mount Speaker - FlameStop TV Episode 49
Universal Flame Simulator Test Kit - FlameStop TV Episode 48
Voting Closes Thursday - Support Ben Parkhill for the FPA Australia Board
Reduce Expensive Fire Brigade Call-Out Fees with the MX850 Series Smoke Detectors
See allSubcategories
[creativeslider id="71"]
The all-in-one test solution for heat, smoke and CO fire detectors
Leading Detector Test Equipment
Complies with AS1851 requirements for smoke detector sensitivity testing
SMOKE DETECTOR SENSITIVITY TESTING IS A REQUIREMENT OF AS1851 IN BOTH 2012 & 2005 EDITIONS – Refer section G6 in Appendix G – FIRE DETECTOR TESTING
Faster testing with no oily residue left on detectors.
The new Solo A5 and A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world.
Solo A5 and Solo A10 have been created to use different gasses to the Solo A3, this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore, as of the 31st December 2017 No Climb discontinued manufacturing Solo A3.
The new regulations mean that Solo A3, Solo A7, Aero 300 & Chekkit Smoke gas canisters will be phased out.
The manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017, however we do still have very limited stock of these products but once they’re all gone the product will be discontinued.
The new regulations mean that Solo A3, Solo A7, Aero 300 & Chekkit Smoke gas canisters will be phased out.
The manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017, however we do still have very limited stock of these products but once they’re all gone the product will be discontinued.
Two aerosols are being brought out – Solo A5 and Solo A10 which can be used in the Solo 330 dispensers, both products will offer a comparable performance to Solo A3. The Solo A10 offers a 150ml version; which will be suitable for replacing the Aero 300 hand-held smoke gas canister, alternatively the SmokeSabre will also be a relevant replacement. Unfortunately, the Solo A7 detector air duster is not going to have an aerosol replacement, but we do offer the Cyclone battery powered can-less air system. Click here for more information on the Cyclone product
The Solo 727 charger enables fast charging ONLY for the Solo 770 Battery Batons that are used to power the Solo 451 Heat Detector Tester, Testifire Heads and Scorpion product.
Key features include:
Note: The Solo 727 has recently been introduced and is designed to charge the Solo 770 battery batons.
The Solo 725 or Solo 726 chargers are needed to charge Solo 760 battery batons.
BATTERIES | CHARGERS | ||
NC-SOLO721 | NC-SOLO726 | NC-SOLO727 | |
NC-SOLO720 | Yes | Yes | NOT COMPATIBLE |
NC-SOLO760 | Not recommended | Yes | NOT COMPATIBLE |
NC-SOLO770 | Not recommended | Not recommended | Yes |
FlameStop Australia is proud to provide one of the newest innovative products to the Australian fire industry.
Scorpion saves thousands of dollars in maintenance costs with less disruption to your work, click on any of the below applications to learn more about how Scorpion can start saving you time and money.
These detectors have high immunity to false alarms. They are sensitive to flickering, low frequency (1 to 15Hz) infra-red (IR) radiation emitted by flames during combustion.
They will continue to function under the most difficult of conditions, even if the lens is contaminated by a layer of oil, dust, water, vapour or ice. The detector has three infrared (IR) sensors which respond to different infra-red (IR) wavelengths in order to discriminate between flames and spurious sources of radiation. They are ideal for indoor or outdoor applications.
TruTest Smoke Detector Sensitivity Kit (Pole Not Included)
NC-FPS101
Sensitivity & calibration tester as required by AS1851 maintenance testing standard The kit comes complete in carry bag and will fit onto any SOLO...
HOLSTER for CYCLONE Canless Air System
P-CYC01H
Synthetic heavy duty holster for Cyclone Canless Air System. Carry on your belt for fast access