No results found for ""

Sign In
Portable Fire Equipment AS1851 Testing Equipment Fire Detection Systems VESDA & FAAST FLEX ASD Exit & Emergency Lighting Suppression Systems Fire Fighting Foam Water & Mechanical Passive Fire Equipment Fire Hydrant Landing Valves & Equipment Batteries Cable Cabinets Hardware & Fasteners Signage & Stickers Pro Audio - Public Address
SIO800 Single Input Output Module 555.800.063

SIO800 Single Input Output Module 555.800.063

Part Number: P-555.800.063

  • Operating Voltage: 20 to 40Vdc (MX addressable loop voltage)
  • Quiescent Current: 300?A (max.)
  • Alarm Current: 3mA (max, LED on)
  • Circuit Resistance: 50 Ohm
  • Relay Contact Rating: 2A @ 24Vdc (max.)
  • EOL Resistor: 3k3 Ohm
  • Alarm Resistor: 680 Ohm
  • Ambient Temp: -25 to +70°C
  • Relative Humidity: 10% to 95% (n/cond)
  • Dimensions (HWD): 61 x 84 x 25mm
  • ActivFire Listed: afp-3168
  • FPANZ Listed: VF/671
  • CIE Compatibility: MX1-Au, MX1-NZ
Category: Addressable Modules and Field Devices
SIO800 Single Input Output Module 555.800.063

Product Information

The SIO800 Addressable Single Input/Output Module is an MX addressable module that provides one clean contact input and a voltage-free changeover relay output. The input supports normally-open or normallyclosed contacts and short/open circuit faults — depending on the input mode selected by the Control and Indicating Equipment (CIE). The relay is controlled by a command sent from the CIE via the MX addressable loop. The LED illuminates when the input goes into alarm, and can also be programmed to blink when polled by the CIE. The MX1 CIE supports the following modes for the input circuit:

  • Normally-open contact, closing for alarm, with open circuit fault.
  • Normally-open contact, closing for alarm, with short and open circuit fault.
  • Normally-closed contact, opening for alarm, with short circuit fault.
  • Normally-closed contact, opening for alarm, with short and open circuit fault.

Use with MX1.

Downloads

CATALOGUE

CATALOGUE - JCI