Photoelectric 240-volt Smoke Alarm with 9-volt Alkaline battery back-up
P-EIB146RC
Wireless Interconnection Base to suit 140RC series only (240-volt)
Part Number: P-EIB168RC
The Brooks Wireless Interconnection Base has the following features:
- Mains Powered
- Designed for use with the Easi-FitTM compatible product range
- RF range 100 metres (minimum) in free space
- Uniquely coded to work with one system only
- Advanced suppression and calibration technology increases reliability
- Low power battery warning in the event of a battery failure
- 10-year rechargeable lithium battery back-up
- 5-year guarantee
Technical Details
- Width (mm):
- 155.0
- Height (mm):
- 40.0
- Approvals:
- AS3786:2014
- Battery Back-up:
- 9-volt Alkaline
- Carbon Monoxide:
- No
- Dimensions:
- L180 x W155 x H40mm
- Heat:
- Yes
- Interconnect Capability:
- Hardwire interconnection (up to 12 interconnected devices). Wireless interconnection possible by installing RadioLINKTM module
- Ionisation:
- No
- Length (mm):
- 180
- Low Battery Warning Alert:
- Yes
- Mains Powered:
- Yes
- Pack Quantity:
- 1.0
- Photoelectric:
- No
- Single Units:
- Yes
- Test/Reset Button:
- Yes
- Warranty:
- 5 year (limited) warranty
- Weight:
- 250g
Product Information
The P-EIB168RC RadioLINKTM base houses a Brooks RadioLINKTM module which transmits a Radio Frequency (RF) alarm signal when the unit attached to it is triggered. When an RF alarm signal is received from another RadioLINKTM enabled device, the attached smoke or heat alarm will sound. It therefore eliminates the need to run interconnect wires between all the smoke alarms on different floors and in different rooms.
P-EIB168RC
It is designed for use with the EiB140RC series of Mains Powered Smoke/Heat Alarms. The RadioLINKTM base itself, is also mains powered and has a rechargeable lithium battery for back-up in the event of mains failure. The RadioLINKTM base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINKTM base rather than to its normal mounting plate. As many as 12 units can be interconnected in this way.
