Photoelectric 240-volt Smoke Alarm with 9-volt Alkaline battery back-up
P-EIB146RC
Wireless Relay Module with 10-year Lithium battery back-up
Part Number: P-EIB428RF
The Brooks Wireless Relay Module has the following features:
- Mains Powered
- RF range 100 metres (minimum) in free space
- Green LED Mains Indicator Light
- Uniquely coded to work with one system only
- Low power battery warning in the event of a battery failure
- Rechargeable lithium battery back-up
- Wireless interconnect with up to 12 RadioLINK devices
Technical Details
- Battery Back-up:
- 10-year Lithium rechargeable, non-removable
- Carbon Monoxide:
- No
- Heat:
- No
- Interconnect Capability:
- Up to 12 RadioLINK devices can be interconnected
- Ionisation:
- No
- Low Battery Warning Alert:
- No
- Mains Powered:
- Yes
- Photoelectric:
- No
- Test/Reset Button:
- No
Product Information
The P-EIB428RF RadioLINKTM Relay Module is a device that switches a relay upon receipt of a RadioLINKTM alarm signal from a compatible Brooks alarm.
P-EIB428RF
The potential free contacts can be used for many applications such as signalling, turning on lights, etc. The P-EIB428RF is designed to operate with all RadioLINKTM enabled products.
The P-EIB428RF RadioLINKTM Relay Module is powered by the 240-volt mains and has a non-removable, rechargeable, lithium back-up battery. The relay can be configured as a “latching” or “pulse” output via a removable link on the PCB. As supplied the relay operates in a “latching” mode (i.e. it switches when one of the smoke/heat alarms is triggered and only resets when the triggered alarm resets. When the dip switch is removed, the relay is configured in the “pulse” mode. The relay will initially change state when a connected alarm is triggered and will automatically switch back again after 5 seconds. This is commonly used with warden call systems where only momentary closed contact signal is required.
Up to 12 RadioLINK devices can be interconnected.
