RESOURCES
New Quick-Connect Metal Grille Flush Mount Speaker - FlameStop TV Episode 49
Universal Flame Simulator Test Kit - FlameStop TV Episode 48
Voting Closes Thursday - Support Ben Parkhill for the FPA Australia Board
Reduce Expensive Fire Brigade Call-Out Fees with the MX850 Series Smoke Detectors
See allSubcategories
[creativeslider id="71"]
The all-in-one test solution for heat, smoke and CO fire detectors
Leading Detector Test Equipment
Complies with AS1851 requirements for smoke detector sensitivity testing
SMOKE DETECTOR SENSITIVITY TESTING IS A REQUIREMENT OF AS1851 IN BOTH 2012 & 2005 EDITIONS – Refer section G6 in Appendix G – FIRE DETECTOR TESTING
Faster testing with no oily residue left on detectors.
The new Solo A5 and A10 have been designed to replace the Solo A3 and are suitable for testing all types of smoke detectors installed into buildings all around the world.
Solo A5 and Solo A10 have been created to use different gasses to the Solo A3, this is because a gas within the A3 called HFC 134a has been identified in recent years by world governing bodies as harmful to the environment. Therefore, as of the 31st December 2017 No Climb discontinued manufacturing Solo A3.
The new regulations mean that Solo A3, Solo A7, Aero 300 & Chekkit Smoke gas canisters will be phased out.
The manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017, however we do still have very limited stock of these products but once they’re all gone the product will be discontinued.
The new regulations mean that Solo A3, Solo A7, Aero 300 & Chekkit Smoke gas canisters will be phased out.
The manufacturer No Climb will no longer be able to manufacture these products after 31st December 2017, however we do still have very limited stock of these products but once they’re all gone the product will be discontinued.
Two aerosols are being brought out – Solo A5 and Solo A10 which can be used in the Solo 330 dispensers, both products will offer a comparable performance to Solo A3. The Solo A10 offers a 150ml version; which will be suitable for replacing the Aero 300 hand-held smoke gas canister, alternatively the SmokeSabre will also be a relevant replacement. Unfortunately, the Solo A7 detector air duster is not going to have an aerosol replacement, but we do offer the Cyclone battery powered can-less air system. Click here for more information on the Cyclone product
The Solo 727 charger enables fast charging ONLY for the Solo 770 Battery Batons that are used to power the Solo 451 Heat Detector Tester, Testifire Heads and Scorpion product.
Key features include:
Note: The Solo 727 has recently been introduced and is designed to charge the Solo 770 battery batons.
The Solo 725 or Solo 726 chargers are needed to charge Solo 760 battery batons.
BATTERIES | CHARGERS | ||
NC-SOLO721 | NC-SOLO726 | NC-SOLO727 | |
NC-SOLO720 | Yes | Yes | NOT COMPATIBLE |
NC-SOLO760 | Not recommended | Yes | NOT COMPATIBLE |
NC-SOLO770 | Not recommended | Not recommended | Yes |
FlameStop Australia is proud to provide one of the newest innovative products to the Australian fire industry.
Scorpion saves thousands of dollars in maintenance costs with less disruption to your work, click on any of the below applications to learn more about how Scorpion can start saving you time and money.
These detectors have high immunity to false alarms. They are sensitive to flickering, low frequency (1 to 15Hz) infra-red (IR) radiation emitted by flames during combustion.
They will continue to function under the most difficult of conditions, even if the lens is contaminated by a layer of oil, dust, water, vapour or ice. The detector has three infrared (IR) sensors which respond to different infra-red (IR) wavelengths in order to discriminate between flames and spurious sources of radiation. They are ideal for indoor or outdoor applications.
Autoranging Logic Tester Digital Multimeter
PDMM
Features Manual override of auto-ranging Range hold & data hold Auto power off Temperature measurement sensor included) Continuity buzzer Diode...
IP67 Waterproof True RMS Digital Multimeter
PDMM-IP67
Features True RMS AC measurement IP67 splash and dust-proof 4000 count LCD Autoranging MAX/MIN display modes Frequency counter to 40MHz...
FlameStop Digital Extinguisher Scales 50kg
TSCALES50KG
Ideal for weighing Co2 Extinguishers as part of AS1851 Units: g, kg, lb, oz Blue backlight Tare function Auto power off 2 x AAA batteries...
Solo 727 Battery Charger
NC-SOLO727
Note: This can be bought in a NC-BATKIT kit with the Solo 727 Battery Baton. The Solo 727 charger enables fast charging ONLY for the Solo 770...
Solo 770 Battery Baton
NC-SOLO770
Note: This can be bought in a NC-BATKIT kit with the Solo 727 Battery Charger. The new Solo770 Battery Baton is a 3000mAh version of the older...
Solo Battery Charger Kit Containing 2 x Solo 770 Battery Batons & 1 x Solo 727 Battery Charger
NC-BATKIT
This kit contains the following: 2 x Solo 770 Battery Batons 1 x Solo 727 Battery Charger
150ml HFC-Free Smoke Detector Tester
NC-SOLO-A10
Non-Flammable Detector manufacturer approved Fully compliant with latest regulations Safe formula – for user and detector Compatible with the...
A10 HFC-FREE 250ml Smoke Can Non Flammable for SOLO Dispenser
NC-SOLO-A10-250
Non-Flammable Detector manufacturer approved Fully compliant with latest regulations Safe formula – for user and detector Compatible with the...
Small Gold Adaptor for VOX Tripod Stand
PVOX-TRIPOD-AD
Allows the VOX01 Analyser to mount onto a tripod stand. Also allows the VOXBOX to mount onto a tripod stand.
AS5062 Maintenance Date Tag - Aluminium
WDT5062
For servicing of fire equipment in accordance with AS5062 W80 x H40mm
AS5062 Maintenance Date Tag - Stainless Steel
WDT5062-SS
For servicing of fire equipment in accordance with AS5062 W80 x H40mm Stainless Steel