Signage & Stickers

Latest News

New Quick-Connect Metal Grille Flush Mount Speaker - FlameStop TV Episode 49

Universal Flame Simulator Test Kit - FlameStop TV Episode 48

Voting Closes Thursday - Support Ben Parkhill for the FPA Australia Board

Reduce Expensive Fire Brigade Call-Out Fees with the MX850 Series Smoke Detectors

See all

IMPORTANT INSTALLATION NOTICE

This is only applicable to plastic and metal signage.

Comes with Surface Protective Film (IMPORTANT: This film needs removing after installation)

For best results Install with VHB tape, Silicone or Liquid nails

Important Note: There are various fire standards being introduced over the years and some lettering heights might not comply to the current standards. We also provide signs/stickers for various countries with different lettering height requirements. Please ensure you have checked the lettering height of the sign/sticker you are ordering meets your job requirements. Please contact us if you are unable to find the sign you need so a new template/sign can be created.

Subcategories

Custom Engraved Sign
Custom Printed Sign
Custom Vinyl Cut Sign
Signs and Labels
Information Sheet Downloads
ACM Metal Signs
Acrylic Signs
Plastic & Angle Signs
Reflective Signs
Vinyl Stickers
Stickers Not Sticking?
IMPORTANT INSTALLATION NOTICE
This is only applicable to plastic and metal signage.
- Comes with Surface Protective Film (IMPORTANT: This film needs removing after installation)
- For best results Install with VHB tape, Silicone or Liquid nails
Engraved Signs
Important Note: There are various fire standards being introduced over the years and some lettering heights might not comply to the current standards. We also provide signs/stickers for various countries with different lettering height requirements. Please ensure you have checked the lettering height of the sign/sticker you are ordering meets your job requirements. Please contact us if you are unable to find the sign you need so a new template/sign can be created.
Vinyl Cut Lettering
ALL OUR SIGNS ARE AVAILABLE IN: VINYL, PVC, CORFLUTE, ACRYLIC, ACM & ENGRAVED

FlameStop offer a vinyl cut service for all your graphic and signage needs. We can produce a large array of signage in any size or colour you can imagine. We can cut vinyl from our library of standard signs or are able to cut custom vinyl using your artwork as long as it is supplied in the appropriate digital format (see website for details). All vinyl graphics are supplied weeded and are ready to apply with transfer paper. All you need to apply is patience, a craft knife and a rubber squeegee. See our website on ‘how to’ install our vinyl graphics yourself.
Our standard range of vinyl is Black, Red and White. To order any of these colours just append the job number with either: -B, -R or -W. We also offer a wider choice of colours, please call for availability.
Information Sheet Downloads
Computer Cut Stickers
Important Note: There are various fire standards being introduced over the years and some lettering heights might not comply to the current standards. We also provide signs/stickers for various countries with different lettering height requirements. Please ensure you have checked the lettering height of the sign/sticker you are ordering meets your job requirements. Please contact us if you are unable to find the sign you need so a new template/sign can be created.

Block Plans & Evac Plans

category-banner-image-block-plans-and-signs

Professional signage with fast turn around times

Download Sign Quote Request Form

Download

Commonly Used Materials for Block / Evac Plans

MATERIAL	TRAFFOLYTE MATERIAL	PERSPEX / ACYRLIC	ALUMINIUM COMPOSITE MATERIAL (ACM)	FOAM / CORFLUTE
Fire Detection Block Plans (AS1670.1)
Fire Fan Control Panel Schematics with Cause & Effect Matrix (AS1670.1 & AS1668)
Evacuation Plans (AS3745)
Hydrant Block Plans (AS2419)
Sprinkler Block Plans (AS2118)
Tactical Fire Plans (Section E1.8 of the BCA)

Drawing Capabilities

If you are unable to provide an editable electronic version drawing then don’t stress, FlameStop can draw up block plans from scratch at an hourly rate if required. Typically our customers will provide us with an AutoCad DWG or EPS file of their drawing to keeps costs to a minimum.

Supplying Artwork

We can accept a range of artwork files to produce your custom block plan. If you do choose to supply artwork for print we accept the following formats: Adobe Illustrator CC or below (packaged), Adobe Indesign CS6 or below (packaged), Adobe PDF (press quality), AutoCAD DWG, bitmap files PSD, TIFF or JPG (minimum requirement RGB 300ppi), vector files (CDR or EPS). Please contact us if you have any questions. A detailed supplying artwork guide can be found on our website.

Information Sheet Downloads

ACM Metal Signs

Acrylic Signs

Snap Frames
[creativeslider id="85"]
Looking for a snap frame that is suitable for sheltered outdoor use as well as indoor use?
Our unique quick-load snap frames enable you to swap over your evacuation diagrams in seconds. We offer a variety of sizes ranging from A0 to A4 and other sizes are available on request.
Open all four snap frame edges by lifting upwards. Remove anti-glare UPVC protective cover.
Mount via 4 screw holes located underneath the lifted frame edges. Fix to the desired surface using the screws provided.
Keep the snap frame edges open and place your graphic within the inset interior frame.
Again, keeping the snap frame edges open place the anti-glare sheet over your graphic making sure it has full even coverage.
Cabinet Stickers