New products

Green DP/DT Resettable Manual Call Point

PMCP-GREEN-DPDT

88mm(L) x 88mm(H) x 55mm(d) Resettable key included Resettable: yes Text on device: "EMERGENCY DOOR RELEASE" text Trigger alarm: press plastic...

ALERT - Traffolyte Sign

PSIGN-P0002

Important Note: There are various fire standards being introduced over the years and some lettering heights might not comply to the current...

EVAC - Traffolyte Sign

PSIGN-P0001

Important Note: There are various fire standards being introduced over the years and some lettering heights might not comply to the current...

Tyco Pressure Switch PS40-1

VMSTPS40-1

The Weflo UL / FM Pressure Switches (WPS Series) are used in wet, dry, deluge, or pre-action automatic sprinkler systems.   They are designed for...

THIS WAY UP (With Arrow) - 100 x 100mm - Vinyl Sicker

PTWU-100-V

Intelligent Monitor Module

P-M500M

Intelligent Single Relay Module for P130 Series

P-M500R

QE20 Cooling Fan Filter, 5 Pack

P-FP2028

When a QE20 Cooling Fan Filter is installed in a QE20 cabinet, an air filter is fitted to the bottom of the cabinet to stop dirt being sucked into...

QE20 Fused Power Distribution Board

P-FP2027

The QE20 Fused Power Distribution Board provides 4 separately fused 24VDC outputs for wiring to other equipment inside the QE20 panel or to...

QE20 SECP Controller Module

P-FP2026

The QE20 SECP Controller Module is the brain of the QE20 system. The controller module may be used as replacement for an existing controller module...

QE20 Fibre IP Networking Kit, MULTI MODE

P-FP2025

The QE20 Fibre IP Networking Kit, MULTI MODE, is used alongside the RS485 Network Module to provide a fibre optic cable networking interface for a...

QE20 Fibre IP Networking Kit, Single Mode

P-FP2024

The QE20 Fibre IP Networking Kit, Single Mode is used alongside the QE20 RS485 Network Module (P-FP2005) to provide a fibre optic cable networking...

QE20 2 x 4 Way 100V Splitter Module

P-FP2023

The QE20 2 x 4 Way 100V Splitter Module can be used to split 2 QE20 amplifier 100V outputs into sets of 4, or 1 amplifier 100V output into 8, short...

QE20 8 WIP Expansion Board

P-FP2022

The QE20 8 WIP Expansion Board may be used to expand a QE20 16 WIP Extender Module if 16 WIPs are required, or as a replacement for an existing...

QE20 8 Zone Expansion Board

P-FP2021

The QE20 8 Zone Expansion Board may be used to expand a QE20 16 Zone Extender Module Kit (P-FP2013) if 16 zones are required, or as a replacement...

QE20 19” Rack Cab Battery Shelf

P-FP2020

The QE20 19” Rack Cab Battery Shelf is a grey metal plate that can be mounted in a QE20 40U deep cabinet to provide a shelf for mounting a second...

QE20 Rack Cab Cooling Module

P-FP2019

The QE20 Rack Cab Cooling Module may be fitted to a QE20 cabinet to provide forced air cooling when a system is expanded above the natural cooling...

QE20 AMP Module Quad 60W

P-FP2018

The QE20 AMP Module, Quad 60W may be used to provide 4 x 100V 60W loudspeaker outputs in a QE20 system or as a replacement for an existing module...

QE20 Extender Module Blank

P-FP2015

The QE20 Extender Module Blank is a 3U high metal plate used to fill unused space in the QE20 inner door.

QE20 WIP Tray

P-FP2014

This QE20 WIP tray kit is a 3U high metal panel containing the PA microphone (fitted) and space for the master WIP handset for mounting in the QE20...