Sealants & Adhesives

Latest News

View larger

ToolBox Invisible Multi-Use Adhesive and Sealant 300g

Part Number: X-TBOXINV

Tool Box^TM Invisible is an MS polymer, moisture curing adhesive and sealant in one that cures to form a tough, water resistant seal.

Tool Box Invisible adheres to a wide variety of materials and is a true 'tool box' in a cartridge.

Solvent free
Isocyanate free
Free from phthalate plasticisers
Cures to form a permanently flexible and elastic bond
Rapid skinning and curing
Interior/exterior - High UV resistance
Heat resistant to 80°C
Non-corrosive
Resistant to chemicals - mineral oils, solvents, acids and alkalis (consult HB Fuller for job-specific information)
Mould resistant

Tool Box^TM Invisible is an MS polymer, moisture curing adhesive and sealant in one that cures to form a tough, water resistant seal.

Tool Box Invisible adheres to a wide variety of materials and is a true 'tool box' in a cartridge.

Solvent free
Isocyanate free
Free from phthalate plasticisers
Cures to form a permanently flexible and elastic bond
Rapid skinning and curing
Interior/exterior - High UV resistance
Heat resistant to 80°C
Non-corrosive
Resistant to chemicals - mineral oils, solvents, acids and alkalis (consult HB Fuller for job-specific information)
Mould resistant

Downloads

Technical Details

Box Quantity : 6
Colour : Translucent
Material : Polymer
Single Units : Yes
Weight : 300g

Product Information

Tool Box^TM Invisible is an MS polymer, moisture curing adhesive and sealant in one that cures to form a tough, water resistant seal.

Tool Box Invisible adheres to a wide variety of materials and is a true 'tool box' in a cartridge.

Solvent free
Isocyanate free
Free from phthalate plasticisers
Cures to form a permanently flexible and elastic bond
Rapid skinning and curing
Interior/exterior - High UV resistance
Heat resistant to 80°C
Non-corrosive
Resistant to chemicals - mineral oils, solvents, acids and alkalis (consult HB Fuller for job-specific information)
Mould resistant

[ Substrates ]

Rubbers
Cement
Aluminium
Fibreglass
Brick
Steel
Concrete
Fibre Cement
Glass
Plastics (pre-test)
Timber

Not recommended for: submerged or constant water immersion, structural bonding.

[ Uses In ]

Internal and external use
Sealing and bonding a wide variety of substrates
For transparent, colourless results
Sealing gaps in concrete, brick, mortar, metal and stonework
Toolbox^TM Invisible is suitable for Green Building applications requiring VOC of maximum 30g/lt

[ How to ]

All surfaces must be clean , dry, sound and free from dust, oil, old sealant or other contamination. For best results wipe all surfaces with isopropyl alcohol (IPA), using a lint free cloth. Manufacturers pf plastics should be consulted about suitable cleaning solvents. Adhesion to plastics should be pre-tested if in doubt.

Application: Cut tip off cartridge, fit nozzle, load into HB Fuller caulking gun and trim nozzle to desired size.

Adhesive - apply to one surface, press together the components. When used as an adhesive, ensure at least 2mm bond thickness is formed, do not clamp or use excessive force otherwise adhesive will be squeezed out from join. Support until a strong bond is formed.

Sealant - When used as a sealant, apply Toolbox ^TM Invisible and within 10 minutes tool off to a smooth finish using a spatula. Toolbox^TM Invisible cures by reaction with moisture, so encapsulation between non porous surfaces will delay or suppress cure from occurring.