HBF 780 Plumbers Translucent Silicone 300g

View larger

Silicone Clear No More Gaps 300G Tube

Part Number: X-S780

FulaSeal 780 Plumbers is a neutral cure silicone sealant which does not corrode materials commonly used in roofs and gutters.

For use with potable (drinking) water (AS4020-1999)
Permanently flexible: +/- 25% joint movement capability
Interior/exterior application
Neutral cure – will not corrode metal or concrete
Water resistant

FulaSeal 780 Plumbers is a neutral cure silicone sealant which does not corrode materials commonly used in roofs and gutters.

For use with potable (drinking) water (AS4020-1999)
Permanently flexible: +/- 25% joint movement capability
Interior/exterior application
Neutral cure – will not corrode metal or concrete
Water resistant

Downloads

Technical Details

Box Quantity : 20
Colour : Translucent
Material : Silicone
Single Units : Yes
Weight : 300g

Product Information

FulaSeal 780 Plumbers is a neutral cure silicone sealant which does not corrode materials commonly used in roofs and gutters.

For use with potable (drinking) water (AS4020-1999)
Permanently flexible: +/- 25% joint movement capability
Interior/exterior application
Neutral cure – will not corrode metal or concrete
Water resistant

[ Substrates ]

Terracotta
Zincalume
Lead
Aluminium
Fibreglass
Glass
Ceramic Tiles
Plastics (pre-test)
Galvanized Iron
Masonry
Steel
Stainless Steel

Not recommended for: structural glazing, polycarbonate, burst pipes or rusted guttering as a plug or seal, constant water immersion, aquariums, cannot be painted over.

[ Uses In ]

Used in sheet metal and aluminium roofing applications
Exterior cladding
Guttering
Flashing
Downpipes

[ How to ]

All surfaces must be clean, dry, sound and free from dust, oil, old sealant or other contamination. For best results wipe all surfaces with Isopropyl Alcohol (IPA), using a lint free cloth. Adhesion to metals can be further improved by light sanding.

Application: Mask either side of joint to produce a neat finish. Cut tip off cartridge, fit nozzle, load into H.B. Fuller caulking gun and trim nozzle to desired size.

Gently squeeze trigger to dispense and push sealant into joint to ensure complete filling. Within 5 minutes of application, finish surface with wet spatula or other smooth implement. Remove any masking tape before the sealant skins.