Close

Smoke, Heat, Co Alarms & Accessories

Intelligent Heat Alarm - Wireless Interconnect 10 Year Lithium BatteryView larger

Intelligent Heat Alarm - Wireless Interconnect 10 Year Lithium Battery

P-EIB630IRF

  • Fixed temperature fast response thermistor
  • Powered for life Lithium battery
  • Wireless interconnect (via EiB600MRF
  • RadioLINK+ module supplied)
  • AudioLINK+ data download
  • Alarm ramp up in Test mode
  • Fixed temperature fast response thermistor
  • Powered for life Lithium battery
  • Wireless interconnect (via EiB600MRF
  • RadioLINK+ module supplied)
  • AudioLINK+ data download
  • Alarm ramp up in Test mode

Downloads

TECHNICAL DATA SHEETS

Product Information

The EiB630iRF Alarm is activated by heat from a fire, not smoke, which makes it ideal for kitchen installations and other areas where there is normally some level of smoke or fumes and where smoke Alarms may be subjected to false alarms.

The EiB630iRF has a sealed built in 10 Year Lithium battery giving you peace of mind as no battery replacement is required.

The EiB630iRF Alarm must be interconnected to smoke Alarms located along the escape routes to ensure sufficient warning is given to all the occupants. It comes fitted with the EiB600MRF RadioLINK+ module to facilitate wireless RF interconnexion. Up to 12 devices can be interconnected. Alarms interconnected wirelessly must be house coded as a system to prevent communication with other nearby RF systems.

The AudioLINK feature facilitates acoustic download of the Alarm parameters and status using the Ei Electronics AudioLINK app.

For better hearing comfort, the sound level of the alarm increases progressively in Test mode. The Test button can also be used to silence nuisance alarms for a 10 minute period and fault beeps for 12 hours (low battery and sensor fault).

The EiB630iRF self-checks its sensor, battery voltage and internal circuitry every 40 seconds. Any fault condition found will be indicated by a combination of Yellow LED flashes and sound beeps.

Technical Specifications

  • Sensor Type: Thermistor (Class A1 detection. Trigger temperature 58°C ± 4°C)
  • Product Life: 10 Years
  • Supply Voltage: 3V Lithium Battery (non-replaceable)
  • RF Frequency: 926MHz band (1% duty cycle)
  • RF Power: +10dBm
  • RF Range: >100m in free air1
  • Protocol Type: Mesh architecture
  • RF Protocol: RadioLINK+
  • System Size: Up to 12 RF devices2
  • Sound Level: 85 dB(A) at 3m (except in Test mode)
  • Button Test: Checks sensor, battery, electronics and horn
  • Silence Function: Silences alarm for 10 minutes. Silences fault chirps for 12 hours.
  • Data Download: Via the AudioLINK app
  • Visual Indicators: Red LED: Alarm, test, hush mode and memory. Blue LED: RF transmission. Yellow LED: Fault.
  • Memory Feature: Records last alarm event
  • Temperature Range: -10°C to 40°C3
  • Humidity Range: 15% to 95% Relative Humidity (non-condensing)3
  • Fixing: Screw fixings and mounting plate supplied
  • Dimensions: Product: 115mm x 55mm. Packaging: 121mm x 148mm x 63mm.
  • Weight: 200g (Pack + 40g)
  • Warranty: 5 year (limited) warranty
  • Approvals: AS1603.3:2018

30 other products in the same category

Close